The Wellpro Group Hydraulic Disconnect is an extremely robust torque through drop ball disconnect.  The disconnect can handle straight pull, impact, jarring and torque loads without affecting the release mechanism.   The disconnect facility provides a means of disconnecting by simply dropping a ball from surface and applying pressure.  After disconnection a...

The Wellpro Group Hydraulic C-Plate was designed to minimise personnel exposure and allow safe and efficient make-up of tool string connections.   The simple operation is completed by the use of a hydraulically operated hand pump.  This allows the operator full and managed control of raising and lowering the BHA tool string.   [button...

 The Wellpro Group Hydraulic Tubing Anchor is a device used for anchoring bottom hole assemblies within the wellbore. It is typically run in conjunction with Wellpro Groups Hydraulic Tubing Cutter.   The anchor has a high expansion ratio allowing it to be run through restrictions within the completion tubing to anchor within...

The Wellpro Group Flow Release Spear provides a method of engaging and pulling on fish, or other types of equipment, with a slick inside diameter.  As this tool operates hydraulically it can be functioned multiple times.  This is an advantage over other standard non-releasable overshots.   The tool can be utilised by...

The Wellpro Group Flow Release Slick Catch Overshot provides a method of engaging and pulling on plain end fish, or other types of equipment, with a slick outside diameter.  As this tool operates hydraulically it can be functioned multiple times.  This is an advantage over other standard non-releasable overshots.   The tool...

The Wellpro Group Flow Release External Pulling Tool (JDC) is a cost-effective means of engaging, latching and manipulating standard, external fishing necks.   The tool can be utilised by setting down weight to engage the external fishing neck allowing the weight applied to the tool to overcome the internal spring force.  If...

The Wellpro Group Dual Flapper Check Valve provides directional well control during well intervention operations thus preventing inflow of wellbore fluids to the coil tubing.  The tool consists of a two-piece housing assembly containing two removable flapper cartridges.  The flappers are spring loaded in the closed position thus allowing no...

The Wellpro Group Dual Circulating Sub is designed as a circulating component within the BHA.   The circulating sub is ball activated and, when utilised, introduces a flow path from the tool ID to the annulus thus allowing for higher circulation rates.  If, for any reason, circulation through the tool string is...

The Wellpro Group Jetting Nozzle range is available in various designs and diameters along with many standard and bespoke connections.   The multi-port and variable nozzle are designed to give full radial coverage of the wellbore tubular during well intervention operations.  The porting can be manufactured in any combination of up, down...

The Wellpro Group PRO Torque Downhole Motor incorporates industry leading bearing and power sections equipped for the most demanding downhole challenges.   The modular design can be tailored to suit various operational variables including high-temperature, rotational speed, two phase fluids and aggressive fluid applications.   The motors are designed to be used on a...